Special Tools/Supplemental Materials - Yamaha JW-II Service Manual

Introduction
Special tools
1
Deep socket wrench with 10 mm bore (market
product)
This is necessary when tightening the stopper with
the torque wrench.
Supplemental Materials
1 Thread lock
To be applied to threaded portions that easily come
loose, such as screws for stoppers, as in the figure
below.
•
Where to apply thread lock
1. Threaded portion of the stopper
Degrease the threaded portion before applying thread
lock.
3. Threaded portion of installation bolt for the
pipe outer (hand rim).

Special Tools/Supplemental Materials

2
Locktite 241 Grease B (general type)
General waterproof grease can be used on sliding
portions, spin axis bearings, and gear contact
portions.
2. Threaded portion of the main switch
3
90890-69916