Motorola CA50 Developer & User Manual page 432

B - 14 CA50/UCA Client & Server Developer & User Guide
Mounting Instructions
NOTE Connect an approved power supply to the cradle prior to attaching the cradle to the wall mount bracket.
See
Slide the two bracket mounting tabs into the receptacles on the bottom of the cradle as shown. Ensure the
1.
screw hole in the bracket flange aligns with the screw hole in the cradle.
Mounting
tab
Insert Bracket into Cradle
Figure B-11
Screw the .5" Phillips screw (supplied) into the bracket flange and tighten until the cradle is securely
2.
attached to the bracket.
Attach Flange with Screw
Figure B-12
Eight-Slot Spare Battery Charger on page B-8
Mounting
tab
Flange
for power supply information.