Wall Mount Brackets; Kt-102376-01R Bracket - Motorola CA50 Developer & User Manual

Wall Mount Brackets

Two optional wall mount brackets are available for mounting a CA50 battery charger and/or a spare battery charger
to a wall.
• The KT-102376-01R wall mount bracket is used to mount one SAC5000-8000CR (eight-slot) battery charger.
• The KT-102375-01R wall mount bracket is used to mount one CHS5000-8000CR (eight-slot) CA50 charger,
or two SAC5000-8000CR (eight-slot) battery chargers.
KT-102376-01R
Wall Mount Brackets
Figure B-10

KT-102376-01R Bracket

The KT-102376-01R bracket mounts one SAC5000-8000CR (eight-slot) spare battery charger to a wall. Use the
wall mount bracket as a template to mark the locations of the four mounting screws.
Included Hardware
One KT-102376-01R Mounting Bracket
•
One black .5" Phillips round head, thread cutting screw.
•
NOTE Use the .5" Phillips round head screw supplied in mounting bracket kit to attach the eight-slot spare
battery charger to the mounting bracket. This screw is not intended for mounting the bracket on a wall.
For safety and stability, it is recommended that you use the appropriate wall mounting hardware for
installation. For safe mounting, it is essential to use wall anchors appropriate to the wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
The wall mount bracket mounting slots are designed for a fastener with a #8 pan head.
KT-102375-01R
Accessories B - 13