Motorola CA50 Developer & User Manual page 219

LED: The LED flashes based on information from either the data within the notification message or from the
2.
user profile.
The device checks if the notification message has the visible indicator data. If data is available, the LED
flashes.
If the notification message has no data for the visible indicator, the user profile is checked for the information. If
the profile contains the visible indicator information (associated with NotifNoCall) the corresponding LED
flashes.
The information in the notification takes precedence over the profile.
Vibrate: The device vibrates based on information from either the data within the notification message or from
3.
the user profile.
The device checks if the notification message has the vibrate indicator. If data is available, the device vibrates.
If the notification message has no data for the vibrate, the user profile is checked for the information. If the
profile contains the vibrate information (associated with NotifNoCall) the device vibrates.
The information in the notification takes precedence over the profile.
NotifCallActive:
The setting defines the alert behavior when receiving a notification message (on an active phone call).
NotifCallActive
Figure 8-24
The behavior of the alerts is the same as NotiNoCall, except that the settings in the profile take precedence over
the message settings. These alerts function only if the NotifAllowOnCallActive is set to Yes.This setting is under the
device configuration (see device configuration
AppAlertCallActive:
The setting defines the receiving a notification alert behavior when the device is already running an application
and an active call is in progress. The allowed values for tone, visible and vibrate indicators are boolean values,
XML Profile Builder for Device Configuration 8 - 19
page 7-7).