Ip Addressing Plan - Motorola 2.1 Networking Setup Manual

Chapter 2: Network Setup

IP Addressing Plan

Table 2-2 shows the network IP plan for our small system reference design. Four VLANs will
be utilized in our network design (VLAN 1, 24, 31, and 49) each representing a different IP
subnet:
These VLANs are configured in the Cisco Layer 3 switch. A detailed switch configuration is
included in Appendix A.
IP Address
172.31.0.2/16
10.1.0.1/16
10.24.0.1/16
10.49.0.1/16
172.31.0.20
172.31.0.30 to 172.31.255.254
The table 2-3 lists the address pools that will be configured to support our network. These
address pools are configured on One Point Wireless™ Manager server. A Linux setup script
is available from Motorola that will configure the Linux server with these defaults.
Table 2-2 Wireless VLAN /Subnet IP Network Plan
IP Address
DHCP Pool 10.1.0.30 – 10.1.255.254
DHCP Pool 10.24.0.30 – 10.24.255.254
•
VLAN 1 (10.1.0.0/16 network)
•
VLAN 24 (10.24.0.0/16 network)
•
VLAN 31 (172.31.0.0/16 network)
•
VLAN 49 (10.49.0.0/16 network)
Table 2-1 Core IP Network Plan
L3 Switch VLAN 31
L3 Switch VLAN 1
L3 Switch VLAN 24
L3 Switch VLAN 49
One Point Wireless Manager Server
DNS server
DHCP server
TFTP Server
Reserved for other network services servers (VLAN 31)
VLAN 1 (Native)
VLAN 1 Address Pool / Untagged devices
VLAN 24 (IAP and MWR device addresses)
VLAN 24 Address Pool
2-8
Host
Host