8.
REMOTE SERVICE
There are the following functions as Remote Service.
Service Notification:
Supply Notice:
8.1
SERVICE NOTIFICATION
8.1.1
Outline
This function automatically notifies the status of the equipment to the service technician by E-mail. The
following two are the items to be notified. GA-1190 and GA-1200 must be installed in order to use this
function.
•
Total Counter Transmit
When this function is effective, it notifies each counter information periodically (on the set date and
time every month).
•
Service Call Transmission
When this function is enabled, information such as the error code corresponding to the service call
is notified by E-mail.
•
PM Counter Transmit
When this function is effective, it notifies that the PM timing has come when the present PM count
has reached to its setting value.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
This function notifies the service technician of the status of the equipment by
E-mail or FAX.
When "toner near-empty" is detected, this function notifies the service techni-
cian of it by E-mail or FAX.
8 - 1
08/06
e-STUDIO165/167/205/207/237
REMOTE SERVICE
8