Firmware Updating With Toshiba Viewer (E-Studio165/205 Only) - Toshiba e-STUDIO165 Service Manual

6.2 Firmware Updating with TOSHIBA Viewer
(e-STUDIO165/205 only)
Using the TOSHIBA Viewer, you can download the firmware from the PC to this copier for updating.
Important:
• Data to be downloaded should be stored in the same drive as the TOSHIBA Viewer program.
If the data is stored in a different drive (including a floppy disk or the drive of another PC con-
nected to the network), downloading may not be performed normally.
• Do not turn off the power of the copier and the PC while data is being updated.
Data may be damaged causing the copier not to operate normally.
1) Start the TOSHIBA Viewer, and then Click [Setup] on the main welcome menu.
The Toshiba Setup screen appears.
2) Double click [Download (main board)] in Data sources.
The Service setting dialog box appears.
e-STUDIO165/167/205/207/237
FIRMWARE UPDATING
Fig. 6-15
Fig. 6-16
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 10
07/02