Download Print this page

Error Code And Self-Diagnostic Mode - Toshiba e-STUDIO165 Service Manual

Hide thumbs Also See for e-STUDIO165:

Advertisement

2.

ERROR CODE AND SELF-DIAGNOSTIC MODE

2.1
Error Code List
2.1.1
Jam
Error code
Classification
E01
Paper exit jam
E02
E03
Other paper jam
E09
E11
Paper misfeeding
E12
E13
E14
E15
E16
E21
Paper transport jam
E30
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Contents
Jam not reaching the exit sensor: The paper which
has passed through the fuser unit does not reach
the exit sensor.
Stop jam at the exit sensor: The trailing edge of the
paper does not pass the exit sensor after its leading
edge has reached this sensor.
Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.
Jam at the registration area due to registration time-
out error
ADU misfeeding (Paper not reaching the registra-
tion sensor): The paper which has passed through
ADU does not reach the registration sensor during
duplex printing.
Bypass misfeeding (Paper not reaching the regis-
tration sensor): The paper fed from the bypass tray
does not reach the registration sensor.
Drawer misfeeding (Paper not reaching the regis-
tration sensor): The paper fed from the drawer does
not reach the registration sensor.
PFU drawer misfeeding (Paper not reaching the
PFU feed sensor): The paper fed from the PFU
drawer does not reach the PFU feed sensor.
PFP upper drawer misfeeding (Paper not reaching
the PFP upper drawer feed sensor): The paper fed
from the PFP upper drawer does not reach the PFP
upper drawer feed sensor.
PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
PFU drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the PFU feed
sensor.
PFP upper drawer transport jam (Paper not reach-
ing the registration sensor): The paper fed from the
PFP upper drawer does not reach the registration
sensor after it has passed the PFP upper drawer
feed sensor.
2 - 1
07/09
Troubleshooting
P. 5-1
P. 5-1
P. 5-2
-
P. 5-7
P. 5-7
P. 5-8
P. 5-9
P. 5-10
P. 5-11
P. 5-3
P. 5-3
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
2

Hide quick links:

Advertisement

loading

This manual is also suitable for:

E-studio167E-studio205E-studio207E-studio237