Table of Contents
Advertisement
Connecting Hardware Devices
CAUTION: Installing a SCSI device while the power is on may damage the server
and the SCSI device.
SCSI devices can be seriously damaged by static electricity. Wear a wrist or heel
ground cable to discharge static electricity carried on your body. If such equipment
is not available, touch a grounded metal object to discharge static electricity before
working with sensitive electronic components.
2
Remove the device bay spacer. For instructions, see
on page 77.
3
Remove the rails attached to the device bay spacer.
Removing the rails from the device bay spacer
4
Position the rails on the SCSI device and secure them with two screws each.
HINT: There are three types of predrilled holes on each rail. In most cases you will
use the round holes when attaching the rails to a SCSI device.
Attaching the rails to the SCSI device
SCSI devices
Removing device bay spacers
78
Advertisement
Table of Contents
