Management Software
Item
Registered List
Add
Filter
Delete
Filter All
Delete All
If you use the Alert Message function of HEW, specify destinations for Alert Messages
and input a message into the [Message Format] edit box in the Alert Message Contents.
Even if you specify the destinations, when you do not specify the message format in the
Alert Message Contents, a notice to a Management Console is not sent.
When you click the Filter button, the following screen displays.
Item
Alert Message
Filter Setting
Logfile and Event
Type
Set
Select All
Clear All
You can specify destinations for Alert Messages.
Displays an addition window on the lower half of the screen so
that you can specify a computer name or an IP address of the
Management Console machine.
Displays a filter setting window on the lower half of the screen.
Deletes the corresponding Alert Message destination.
Sets the same filter for all destinations.
Deletes all destinations.
You can set Alert Message filtering.
Alert Message is sent when an error corresponding to any of
the selected items occurs.
Select the Logfile and Event Type settings.
Applies the specified settings.
Selects all selectable items.
Clears all items which can be set.
Explanation
Explanation
221
Using HarnessEye/web