Log In To The Web Management Interface - D-Link DWC-2000 User Manual

Section 3 - Basic Configuration

Log in to the Web Management Interface

Configuration procedures using the wireless controller's web management interface are performed using one of
the following supported web browsers:
• Microsoft Internet Explorer 9.0 or higher
• Mozilla Firefox 23 or higher
• Apple Safari 5.1.7 or higher (Windows)
• Apple Safari 6.1.3 or higher (iOS)
• Google Chrome 26 or higher
Before you perform the following procedure:
• Configure your PC running the web browser to use an IP address on the 192.168.10.x network, with a
subnet mask of 255.255.255.0.
• Configure your web browser to accept cookies, prompt for pop-ups, and allow sites to run JavaScript.
• Upgrade the firmware for your wireless controller (see "Upgrading Firmware" on page 20).
• Upgrade the firmware for your access points after you upgrade the wireless controller firmware (refer to
the documentation for your access points).
To log in to the web management interface:
1. Launch a web browser on the PC.
2. In the address field of your web browser, type the IP address for the wireless controller web
management interface. The default IP address is http://192.168.10.1. A login prompt will appear. If
the login prompt does not appear, see "Web Management Interface" on page 257.
3. If you are logging in for the first time, the default user name is admin and the default password is
admin. Both the user name and password are case-sensitive.
Note: We recommend that you change the password to a new, more secure password (see "Editing Users" on
page 174) and record it in Appendix A.
D-Link DWC-2000 User Manual 20