Section 5 - Advanced Network Configuration
Path: Network > QoS > QoS Priority > Port Shaping Rate
This page allows configuring an interface shaping rate to all ports or to a specific port. Right-click and edit the
percentage.
1. Go to Network > QoS > QoS Priority > Port Shaping Rate tab.
2. Right-click the port and select Edit.
3. Select the percentage you want to assign to the port from the drop-down menu and click Save.
Field
Port
Percentage
D-Link DWC-2000 User Manual
Port Shaping Rate
Port to be affected by the Port Shaping Rate
Sets the limit on how much traffic can leave a port. The limit on maximum transmission
bandwidth has the effect of smoothing temporary traffic bursts over time so that the
transmitted traffic rate is bounded.
Description
153