Get Started; Switch Off - Nokia CK-100 User Manual

autorun feature is enabled in
Windows). Select your language and
the user and installation guide.

Get started

Input device
You can operate the car kit using the
input device CU-11 shown at the start
of this guide. The device is provided
TM
with the Navi
turn or press.
Turn the wheel to adjust the volume
when you are using the mobile phone
or music device connected to the car
kit.
Press the wheel for other tasks, for
example, to handle calls.
Switch on
If the ignition sense wire is connected,
turn on the car ignition.
wheel that you can
If the ignition sense wire is not
connected, press and hold the Navi
wheel for about 2 seconds.
Alternatively, turn on the ignition,
start driving, and wait until the built-
in motion sensor switches the car kit
on automatically.

Switch off

If the ignition sense wire is connected,
turn off the car ignition.
If the ignition sense wire is not
connected and you are not using your
phone connected to the car kit for
calling, close the Bluetooth
connection to your phone and music
device.
ENGLISH