ELECTRICAL REQUIREMENTS Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the pro- cedure outlined below.
CONTENTS MAKING DRINKS WITH MILK ....15 Filling and attaching the milk container... 15 Making caffelatte..........16 ELECTRICAL REQUIREMENTS....2 Making cappuccino......... 16 DESCRIPTION OF APPLILANCE ....3 Making macchiato .......... 16 Making milk ............ 16 INTRODUCTION ........8 Cleaning the milk container after use ....16 Symbols used in these instructions ....
INTRODUCTION SAFETY Thank you for choosing this coffee machine. To Fundamental safety warnings get the very best out of your new coffee machine it is advisable to read these instructions before Danger! using the appliance. This is the only way to This is an electrical appliance and may cause ensure optimum results and maximum safety.
DESIGNATED USE DESCRIPTION This appliance is designed and made to prepare Description of the appliance coffee and heat drinks. (page 3 - All other use is considered improper. Grinding adjustment knob This appliance is not suitable for commercial Beans container use.
coffee. icon: to deliver two cups of espresso it cannot be damaged by sharp edges or coffee. contact with hot surfaces (e.g. electric hot OK icon: to enable and confirm the selected plates). function. Connecting the appliance icon: to rinse or deliver hot water. MILK icon: to deliver a cup of milk.
that the hot water spout is inserted on the TURNING THE APPLIANCE OFF nozzle and place a container with a minimum Each time the appliance is turned off, it performs capacity of 100 ml underneath (fig. 4). an automatic rinse cycle which cannot be Press the OK icon (fig.
reduces energy consumption in compliance with To enable this function, the time must be set European regulations. correctly. 1. Press the P icon to enter the programming menu; 1. Press the P icon to enter the programming menu; 2. Press the icon until “Energy saving”...
1. Press the P icon to enter the programming exception of the language which remains as menu; set). 2. Press the icon until “Coffee 1. Press the P icon to enter the menu; temperature” is displayed; 2. Press the icon until “Default Values” 3.
set by default to automatically deliver 30 ml of (coarser ground coffee). “my coffee”. To modify these settings, proceed as follows: These adjustments will only be evident after 1. Place a cup under the coffee spouts ( fig. at least 2 cups of coffee have been delivered. 13).
Once the coffee has been made, the appliance prepares for use again. appliance automatically grinds more coffee halfway through delivery. Please note: Making espresso or long coffee using pre- can be interrupted at any moment by pressing ground coffee one of the coffee icons ( Important! quantity of coffee in the cup, just press machine is off or it could spread through the...
Moving it towards the word CAPPUCCINO Please note! obtains a less dense froth. For a richer denser froth, use skimmed or partially 2. Press the CAPPUCCINO icon (fig. 29). skimmed milk at refrigerator temperature (about “Cappuccino... Froth regulator in position 1” 5°C).
container, a little hot water leaks out of the displayed (with the exception of the MILK frothed milk tube (B5). function) and the icon flashes. Avoid contact with splashes of water. 6. As soon as the coffee in the cup reaches the required level, press the icon.
The machine is now reprogrammed with the new Empty the grounds container and clean quantities. thoroughly to remove all residues left on the bottom. This can be done with the spatula on CLEANING the brush provided. Important! Cleaning the coffee maker When removing the drip tray, the grounds The following parts of the machine must be container must be emptied, even if it contains...
Cleaning the water tank 1. Clean the water tank (A13) regularly (about once a month) with a damp cloth and a little mild washing up liquid. 2. After cleaning the water tank rinse it thoroughly to remove all washing up liquid residues.
Make sure there are no milk residues left 6. Confirm by pressing the OK icon. inside the holes and the groove on the fine 7. The message “Descaling...” is displayed. end of the froth regulator. The descaling programme starts and the 5.
DISPOSAL soft water Important information correct slightly hard water disposal of the product in accordance with EC Directive 2002/96/EC. At the end of its working life, the product must not hard water be disposed of as urban waste. It must be taken to a special local authority differentiated waste very hard water collection centre or to a dealer providing this...
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK ! correctly, pushing it as far as it will go until it clicks into place (fig. 3). GROUND TOO FINE delivered too slowly. grinding adjustment knob one click ADJUST MILL! clockwise towards “7” while the coffee Insert water spout and mill is in operation.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY ADD PRE-GROUND been selected without placing any pre- COFFEE ground coffee in the funnel. Press OK as described in the section “Cleaning the pre-ground coffee funnel”. Energy Saving electricity consumption. GENERAL ALARM! thoroughly, as described in the section “Cleaning and maintenance”.
Page 26
PROBLEM POSSIBLE CAUSE SOLUTION Coffee does not come 40). out of one of the spouts. Water comes out of in the funnel (A8). a knife, as described in the section the spouts instead of “Cleaning the pre-ground coffee funnel”. coffee. The milk contains semi-skimmed.
Need help?
Do you have a question about the PrimaDonna Avant ESAM 6700 EX2 and is the answer not in the manual?
Questions and answers