Download Print this page
Pioneer PRO-100 Service Manual
Pioneer PRO-100 Service Manual

Pioneer PRO-100 Service Manual

Projection monitor receiver
Hide thumbs Also See for PRO-100:

Advertisement

Quick Links

PROJECTION MONITOR RECEIVER
PRO-100
Refer to the service manual ARP2936 for PRO-119 and PRO-99, ARP2988
for PRO-200 and PRO-100.
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
PRO-100
KBXC
1. CONTRAST OF MISCELLANEOUS PARTS
NOTES:
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω
47k Ω
0.5 Ω
1 Ω
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω
Parts marked by
If any of these parts need to be replaced, always replace with specified parts.
×
Parts marked by
printed circuit board assembly where the relevant part has already been adjusted as a working component. Do not replace the
actual part itself. If any part marked by
PIONEER ELECTRONIC CORPORATION
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
c
PIONEER ELECTRONIC CORPORATION 1998
Power Requirement
AC110-120V
56 × 10
1
561 ........................................................ RD1/4PU
47 × 10
3
473 ........................................................ RD1/4PU
R50 ..................................................................................... RN2H
1R0 ..................................................................................... RS1P
562 × 10
1
5621 ...................................................... RN1/4PC
are important parts which relate in X-rays radiation.
are important parts which relate in X-rays radiation. If a failure occurs in any of these parts, replace the
×
is replaced, there is danger of being exposed to X-rays.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
ORDER NO.
ORDER NO.
ARP3014
Remarks
5 6 1
J
4 7 3
J
K
R 5 0
1 R 0
K
5 6 2 1
F
O- SZG OCT. 1998 Printed in Japan

Advertisement

loading

Summary of Contents for Pioneer PRO-100

  • Page 1 PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880 PIONEER ELECTRONIC CORPORATION 1998...
  • Page 2 PRO-100 CONTRAST OF PRO-100/KBXC AND PRO-100/KUXC/CA PRO-100/KBXC and PRO-100/KUXC/CA are constructed the same except for the following: Part No. Ref No. Mark Symbol and Description Remarks PRO-100/KBXC PRO-100/KUXC/CA P3-34 WARRANTY CARD EL ARY1026 Not used P3-35 POLY BAG AHG1285 Not used...
  • Page 3 PRO-100 SCHEMATIC AND PCB DIAGRAMS Note: The differences of adjacencies to power supply section are as follows. L101 ATF1183- KBXC ONLY (KUXC has different parts) L102 ATF1183-...
  • Page 4 PRO-100 L101 L102...