Epson STYLUS PRO 7450 Unpacking & Setup Instructions page 17

3. Fasten the bottom of the printer and the
printer mount with wing screws (L) and
washers (M)
M
L
4. This completes the mounting procedure.
Make sure the printer and the Stand are
fastened together securely.
Attaching the Paper Basket
1. Insert the basket hooks into the slots on the
rotary boards attached to the bottom
horizontal strut. The top ends of the basket
hooks should be facing downward.
2. Snap the rear paper basket joints onto the tips
of the basket hooks at the rear of the Stand.
Make sure the joints are positioned as shown.
M
L
3. Rotate the front paper basket joints to enfold
the bar which is not attached to the fabric as
shown (N). Then, snap the front paper basket
joints onto the tips of the basket hooks at the
front of the Stand. Make sure the joints are
positioned as shown (O).
N
O
15