Epson STYLUS PRO 7450 Unpacking & Setup Instructions page 15

Using the Stand
Checking the contents of the package
Before assembling the Stand, check the contents of
the package to make sure that all of the items
shown are included, and are not damaged.
Parts:
A
C
E
A: Right base (1) and Left base (1)
B: Right leg (1) and Left leg (1)
C: Bottom horizontal strut (1)
D: Top horizontal strut (1)
E: Basket hooks (4)
F: Paper basket (1)
Tool:
G
G: Hex wrench (2)
Accessories:
B
D
Assembling the Stand
F
c
1. Insert the right leg into the right base by
H
J
L
H: Base bolts (4)
I: Strut bolts (2)
J: Hex socket head bolts with washers (10)
K: Collars (2)
L: Wing screws (2)
M: Washers (2)
Caution:
Assembly requires two people. Be careful to
match the right and left legs (R and L is engraved
on the inner side of the base parts) and base parts.
sliding the leg slot onto the base projection as
shown. Use the hex wrench to fasten the leg to
the base with 2 base bolts (H).
H
I
K
M
13