JVC KM-H3000 User Manual page 23

4. Use the Trans knob to set the behavior of the
Next Transition area after a transition is
performed. You can choose from the following:
• Reset — The Next Transition area is reset to
a background dissolve transition
• NotRst — The Next Transition area is not
reset.
Transition Resume Direction
You can choose which direction a paused transition
proceeds in when it is re-started.
To set the transition resume direction:
1
2 3
1. Press MENU.
2. Press the PERS Wipe Pattern button.
3. Press NEXT until Resume is displayed.
4. Use the Resume knob to set the transition
direction used when a paused transition is
re-started. You can choose from the following:
• Fwd — The transition completes as originally
set.
• Rev — The transition reverses and the
switcher returns to the on-air state it was in
before the transition was started.
Next Transition Key Behavior
You can choose whether a Key remains in the Next
Transition area or is removed if a dedicated key
transition is performed.
To set the Next Transition Key behavior:
1
2 3
1. Press MENU.
2. Press the PERS Wipe Pattern button.
3. Press NEXT until ARKey is displayed.
4
4
4. Use the ARKey knob to set whether a Key
remains or is removed from the Next transition
area after a dedicated key transition is
performed. You can choose from the following:
• Off — The Key is removed from the Next
Transition area after a dedicated key transition
is performed.
• On — The Key remains active in the Next
Transition area after a dedicated key transition
is performed.
19