Fixing System; Fixing Unit; Preparation For Removing The Fixing Assembly; Removing The Fixing Assembly - Canon 3370 Series Service Manual

[3]
[2]
4) Detach the duplexing unit [1] from the rear cover unit [2].
- 2 bosses [3]
[2]
[3]

3.5 FIXING SYSTEM

3.5.1 Fixing Unit

3.5.1.1 Preparation for removing the fixing assembly

LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]
3) Remove the rear cover unit.(page 3-1)Reference [Removing the rear
cover unit]
4) Detach the upper cover unit.(page 3-3)Reference LBP3310 [Detaching
the upper cover](page 3-4)Reference LBP3370 [Detaching the upper
cover]
5) Remove the duplexing drive assembly.(page 3-6)Reference [Removing
the duplexing drive assembly]
6) Remove the video controller PCB.(page 3-10)Reference LBP3310 [Re-
moving the video controller PCB](page 3-11)Reference LBP3370 [Re-
moving the video controller PCB]

3.5.1.2 Removing the fixing assembly

LBP3310
1) Free the harness [2] from the edge saddle [1].
2) Remove the plate [3].
- 4 screw [4]
[1]
F-3-75
[3]
[1]
F-3-76
[3]
3) Remove the paper holder unit [1].
- 2 claws [2]
4) Move the guide [1] to the direction of the arrow to remove.
- 7 connectors [2]
- harness [3]
- 1 screw [4]
0018-2980
5) Disconnect the 2 connectors [1].
0018-2982
[4] [3]
[1] [2]
F-3-77
F-3-78
F-3-79
Chapter 3
3-17