External And Controls System; Rear Cover; Preparation For Removing The Rear Cover Unit; Removing The Rear Cover Unit - Canon 3370 Series Service Manual

3.1 EXTERNAL AND CONTROLS SYSTEM

3.1.1 Rear Cover

3.1.1.1 Preparation for removing the rear cover unit

LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]

3.1.1.2 Removing the rear cover unit

LBP3370 / LBP3310
1) Press the lever [1] of the duplexing unit to release the duplexing unit [2].
[1]
[2]
Points to note when attaching
Lift the 2 levers [1] of the duplexing unit and press the magnets [2] on the
both ends against the main body to attach the duplexing unit [3].
[2]
2) Open the rear cover [1] .
3) Detach the rear cover unit [2] together with the duplexing unit.
- 4 screws [3]
[3]
[2]
4) Detach the rear cover unit [1] from the duplexing unit [2].
- 2 bosses [3]
F-3-1
[1]
[3] [2]
[1]
[3]
F-3-2
0018-2603
0018-2604
[3]

3.1.2 Right Cover

3.1.2.1 Detaching the right cover

LBP3370 / LBP3310
1) Remove the cassette.
2) Press the release button [1] to open the front cover [2].
3) Repeat the steps 4) and 5) below to disengage the 3 claws [1] of the right
cover from the bottom to the top.
4) Fit the blade edge of flat-blade screwdriver to the claw [1] of the right cov-
er through the gap with the rear cover.
5) Press [A] of the rear cover to the rear direction and move down the driver
to the direction of [B] to disengage the claw [1] of the right cover.
[1]
[3]
[2]
F-3-3
[1]
F-3-4
Chapter 3
0018-2602
[2]
3-1