Table of Contents
Advertisement
[Wireless Network Connection] dialog, and then click
[Connect].
For Windows Vista
In the [Network and Sharing Center] window, click
[Connect to a network] under [Tasks]. Click [WF1] in
the [Connect to a network] dialog, and then click
[Connect].
2
On your camcorder, select Wi-Fi SETUP: EXEC on
the M26 Wi-Fi page of the MAINTENANCE menu,
and press the MENU knob.
The Wi-Fi SETTING page appears.
3
Select SCAN NETWORKS: EXEC, and press the
MENU knob.
The NETWORKS page appears, and the camcorder
starts scanning for a network connection.
When the network (WF1) is detected, the following
page appears.
4
Select WF1, and press the MENU knob to return to the
Wi-Fi SETTING page.
If the network is not found
On the NETWORKS page, select ESC and press the
MENU knob to display the Wi-Fi SETTING page.
Make the following settings to specify the network to
connect to.
SSID (network name)
NETWORK TYPE (connection mode) : ADHOC
CH (channel)
AUTH (network authentication)
ENCRYPTION (data encryption)
WEP KEY INDEX
INPUT SELECT (network (security)
key input format)
Here, the key is set to "12345", so select ASCII5.
For a 13-letter ASCII string
For a 10-digit hexadecimal string : HEX10
For a 26-digit hexadecimal string : HEX26
Note
Windows Vista computers support connection with
the WEP key index fixed to 1. If you use both
Windows Vista computers and Windows XP
computers, set the WEP KEY INDEX to 1.
5
Set the KEY to the network (security) key set on your
computer, and press the MENU knob.
In this example, set the security key to "12345".
KEY: 12345
6
Select SET, and press the MENU knob.
The camcorder initiates the connection while
redisplaying the M26 Wi-Fi page.
If the connection to the computer is complete, then the
display will appear as follows.
Making a Wi-Fi Connection to Your Computer (Ad hoc Mode)
: WF1
: 1
: OPEN
: WEP
: 1
: ASCII5
: ASCII13
9
Advertisement
Table of Contents
