Ipevo Presenter Software; Introduction; Changing The Window Size - Ipevo Ziggi-HD Plus User Manual

IPEVO Presenter Software

Introduction

Specially-designed IPEVO Presenter software provides a rich suite of features to maximize your Ziggi-HD
Plus use.
IPEVO Presenter operates in one of three modes:
• Camera mode – This is the default mode upon software startup. This mode shows the current video
capture coming from the Ziggi-HD Plus camera. In this mode, you are also able to change aspects of
the image such as exposure, mirroring, and resolution.
image.
• Review mode – This mode gives you an easy way to review snapshots and videos taken with your
Ziggi-HD Plus. Snapshots and videos are presented as thumbnail images sorted by date.
for more on taking snapshots.
• Splitscreen mode – The video feed from two doc cams can be presented side by side, or a single doc
cam's feed can be split into two.
* Please note: Do not use a USB hub for this purpose. You'll need to plug the two document cameras
into the USB ports on your computer. High computer performance is required when two doc cams are
connected at high resolutions. If the image freezes or lags in this setup, consider lowering the resolution.
To switch between modes, click on one of the Mode Tabs on the left-hand side of the capture window.
Camera mode

Changing the Window Size

The size of the Presenter window can be changed by clicking and dragging on the edges of the window.
Or, click on the arrows in the top right to enter full screen mode. In this mode, the image fills up the
entire computer screen. Full screen is particularly useful when you need to project the Ziggi-HD Plus's
video for presentations.
See Pages 28 and 29 for more on projecting your image.
See Page 13 to get started with capturing your
See Page 36 for more about splitscreen.
Review mode
10
See Page 24
Splitscreen mode