ABB -free home System Manual page 44

05 Types of Devices
Parameter settings Movement detector/switch actuator, 1-gang
Actuator settings
Sensor settings (movement detector settings)
44 │
[1] Changing the name
[2] Deleting the channel via 'X'
[3] Switching of the actuator via the button
[4] Selection of a different icon
[5] Setting the switch-off delay in seconds
Buttons -/+ can be used to specify, for example, how long the light
remains on after the actuator has deactivated the load.
[6] Behaviour during faults:
Selection of how the device is to respond in case of a fault.
[1] Changing the name
[2] Deleting the channel via 'X'
[3] Switching of the actuator via the button
[4] Switch-on behavior:
Selection of the brightness conditions at which the device is to
respond.
ABB-free@home
System Manual
®