Related Manuals for Recsea CWS-RX100IV
Summary of Contents for Recsea CWS-RX100IV
- Page 1 SONY CYBER-SHOT DSC-RX100 IV Waterproof Housing Recsea CWS-RX100IV MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net...
- Page 2 INTRODUCTION SONY CYBER-SHOT DSC-RX100 IV Housing CWS-RX100IV ※ Thank you for purchasing the CWS-RX100IV Waterproof Housing. ※ To ensure proper and safe use, please thoroughly read this manual. ※ Improper use may cause leakage causing irreparable damage to your digital camera.
-
Page 3: Package Contents
・Wrist Strap ・Reserve O-ring Set ・O-ring Removal Pick ・O-ring Grease GETTING TO KNOW YOUR CWS-RX100IV HOUSING ※ Please refer to camera manual for explanation of camera controls. Attach Diffuser as shown above using the grooves provided on the Lens Port. -
Page 4: Warranty Information
Dealer Name Serial Number ※Dealer: Stamp your company name and contact information, purchase date, model and serial number. Recsea/Seatool Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720... - Page 5 OPENING AND CLOSING THE BACK COVER ※ Please do the following operations in a clean area with low humidity and dust. Open & Close Dial Locks in two places, in the open position and in the closed position. 1. To open, while pressing the Open & Close Lock Button, turn the Open & Close Dial Lever to the right (clockwise).
-
Page 6: Setting Shutter Speed
※ Please perform proper Housing and Port O-RING MAINTENANCE prior to installation. ※ Please conduct the following operations in a clean area with low humidity and dust. 1. Make sure the housing Mode Dial is pulled (or pushed) outward away from housing, and camera flash is closed. -
Page 7: Maintenance
※ Two (2) Tripod Sockets are provided at the bottom of the housing for use in attaching Seatool/Recsea genuine tray and grip assemblies. CAUTION! Seatool/Recsea STRONGLY recommends the use of Seatool/Recsea genuine tray and grip assemblies listed below under OPTIONS. Leakage or damages due to the use of non-genuine options are NOT covered under warranty. - Page 8 ※ O-RING GREASING & MAINTENANCE ( 1) CAUTION! DO NOT use silicone grease other than that provided by Seatool/Recsea. 1. Using the O-ring Removal Pick, remove O-rings. 2. Clean sand, salt, other contaminants and old grease from O-rings. 3. Clean O-ring grooves and O-ring Contact Surfaces using a clean cotton swab.
-
Page 9: Specifications
※ For replacement of consumable parts such as O-ring please contact your dealer or Seatool/Recsea. OPTIONS The following items are optional. Please contact Seatool/Recsea or your local dealer if you wish to purchase. ・Airlock Vacuum System RAVS-RX100IV ・M67-ST Adapter ST-NV-M67 ・M67-28LD Adapter AD-M67/28LD... - Page 10 ※ Warranty does not cover any losses resulting from any malfunction of this product, including those related to lost profits or any related expenses. ※ Seatool/Recsea will stock parts necessary for repair for five (5) years from stop of production.
- Page 11 MEMO...
Need help?
Do you have a question about the CWS-RX100IV and is the answer not in the manual?
Questions and answers