Subscribe to Our Youtube Channel
Related Manuals for Recsea WHC-G7X
Summary of Contents for Recsea WHC-G7X
- Page 1 Canon PowerShot G7X Underwater Housing Recsea WHC-G7X MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net...
- Page 2 INTRODUCTION CANON POWERSHOT G7X Underwater Housing WHC-G7X ※ Thank you for purchasing the WHC-G7X Underwater Housing. ※ To ensure proper and safe use, please thoroughly read this manual. ※ Improper use may cause leakage causing irreparable damage to your digital camera.
-
Page 3: Package Contents
※ RECSEA original Secure-Latch locking system for easy opening and closing. ※ Quality silicone O-ring with wider contact surface for added protection at greater depths. ※ Complete camera function control. ※ Variety of supported RECSEA original options. PACKAGE CONTENTS Be sure all items listed here are included: ・WHC-G7X Housing... -
Page 4: Warranty Information
Dealer Name Serial Number ※Dealer: Stamp your company name and contact information, purchase date, model and serial number. Recsea/Seatool Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720... -
Page 5: Installing Camera
※ Please refer to camera manual for explanation of camera controls. ATTENTION! ※ The housing Mode Dial is designed to turn the camera's mode dial back and forth via friction from the o-ring that comes in contact with the mode dial inside the housing. When installing or removing camera pull Mode Dial up. -
Page 6: Removing Camera
※ Please perform proper Housing O-RING MAINTENANCE prior to installation. ※ Please conduct the following operations in a clean area with low humidity and dust. 1. Make sure the housing Mode Dial is pulled (or pushed) outward away from housing, and camera flash is closed. -
Page 7: Maintenance
O-RING GREASING & MAINTENANCE ( 1) CAUTION! DO NOT use silicone grease other than that provided by Seatool/Recsea. ※ Before conducting grease-up of the housing Back Cover and Port O-rings, thoroughly clean O-ring grooves (Back Cover and Port), and O-ring contact surfaces (Back Cover and... - Page 8 CAUTION! This housing uses one (1) O-ring. Please be sure to install O-ring as shown above. Failure to do so will result in water leakage. 1. Using the O-ring Removal Pick, remove O-ring. 2. Clean sand, salt, other contaminants and old grease from O-ring. 3.
-
Page 9: Specifications
※ For replacement of consumable parts such as O-rings please contact your dealer or Seatool/Recsea. OPTIONS The following items are optional. Please contact Seatool/Recsea or your local dealer if you wish to purchase. ・RMMF-01LCD Viewfinder (SPASH UNDERWATER IMAGING) ・ST Adapter ST-NV-M67 Direct To Port ・M67-28LD Adapter AD-M67/28LD Direct To Port... -
Page 10: After-Sale Service
※ Warranty does not cover any losses resulting from any malfunction of this product, including those related to lost profits or any related expenses. ※ Seatool/Recsea will stock parts necessary for repair for five (5) years from stop of production. - Page 11 MEMO...
Need help?
Do you have a question about the WHC-G7X and is the answer not in the manual?
Questions and answers