Using A Rear View Camera - Kenwood DDX6023BT Instruction Manual

Using a rear view camera

• To use a rear view camera, the REVERSE lead connection is required. For connecting a rear
view camera, ☞ page 76 .
Activating the rear view
camera
1
On <Top Menu>:
2
To deactivate, select [OFF].
Displaying the picture from
the rear view camera
The rear view screen is displayed when you
shift the gear to the reverse (R) position.
• To erase the caution message, touch the
screen.
To display the picture from the rear
view camera manually
DDX6023BT/DDX6053BT
DDX4023BT/
DDX4053BT* 1
(Hold)
1
DDX42BT *
(Hold)
When displaying the picture from the rear
view camera manually, you can change the
setting of the picture. (
To erase the rear view screen, press and
hold the same button again.
*
1
This operation works only when <TEL Key Long
Press> is set to <R-CAM>. (
*
2
This operation works only when <AUD Key
Long Press> is set to <R-CAM>. (
(Hold)
DDX3023/
DDX3053* 2
(Hold)
2
DDX35 *
(Hold)
☞
pages 41 and 42 )
☞
page 47 )
☞
page 47 )
43
English