Table of Contents
Advertisement
OTHER EXTERNAL COMPONENTS
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 46.
You can connect an external component to the
AV-IN1 and AV-IN2 input terminals. (Page 59)
Indications and buttons on the source
control screen
AV-IN name
Operation buttons
[MODE]
Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name "AV-IN 1"/ "AV-IN 2"
displayed on the <TOP MENU>.
[MENU]
Displays the <TOP MENU> screen.
Starting playback
1
Connect an external component to
the AV-IN1 or AV-IN2 input terminal.
(Page 59)
2
Select "AV-IN1" or "AV-IN2" as the
source. (Page 8)
3
Turn on the connected component and
start playing the source.
Using a rear view camera
• To connect a rear view camera, see page 59.
• To use a rear view camera, a REVERSE lead
connection is required. (Page 57)
Activating the rear view camera
1
Display the <Input> setting screen.
On the <TOP MENU> screen:
2
To deactivate: Select [OFF] for <R-CAM Interrupt>.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
(Hold)
• This operation works only when <AUD Key Long
Press> is set to [R-CAM]. (Page 53)
• When displaying the picture from the rear view
camera manually, you can change the picture
settings using [Aspect]/[PictureAdjust].
(Page 46)
To exit the rear view screen: Press and hold the
same button again.
ENGLISH
33
Hide quick links:
Advertisement
Table of Contents
