Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety WDUD 9640 Disposal Opening the porthole door manually Description of the washer-dryer, 8-9 Control panel Display...
Installation ! Keep this instruction manual in a safe place ning the adjustable front feet (see figure); the for future reference. Should the appliance be angle of inclination, measured according to the worktop, must not exceed 2°. sold, transferred or moved, make sure the Levelling your appliance correctly will provide instruction manual accompanies the washer- it with stability and avoid any vibrations, noise...
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washer- ding it, to a draining dryer’s plug.
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
Technical data Model WDUD 9640 width 59.5 cm Dimensions height 85 cm depth 60,5 cm from 1 to 9 kg for the wash programme Capacity from 1 to 6 kg for the drying programme Electrical please refer to the technical...
Care and maintenance Cutting off the water and electri- Cleaning the pump city supplies The washer-dryer is fitted with a self-cleaning • Turn off the water tap after every wash cycle. pump which does not require any maintenan- This will limit wear on the hydraulic system ce.
Precautions and tips • This washer-dryer was designed and constructed in ac- Make sure that the water tap is turned on during the drying cycles. • Children of less than 3 years should be kept away cordance with international safety regulations. The following from the appliance unless continuously supervised.
Description of the washer-dryer Control panel CLEANING DRYING ON/OFF ACTION button button button DISPLAY START/PAUSE MYCYCLE button with WASH indicator light button FUNCTION CYCLE Detergent dispenser drawer buttons SELECTOR buttons DELAY TEMPERATURE TIMER button ANTI button ALLERGY CHILD LOCK RINSE button button Detergent dispenser drawer: used to dispense deter-...
Page 9
Display The display is useful when programming the machine and provides a great deal of information. The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress status of the cycle.
How to run a wash cycle or a drying cycle 1. SWITCH THE MACHINE ON. Press the On/Off button Set the desired wash intensity. ; the text POWER ON will appear on the display and the Option makes it possible to optimise washing based on the START/PAUSE indicator light will flash slowly in a green colour.
To wash silk garments and curtains: select the cycle and set the “Delicate” level from option Detergent should only be pou- Wool: the wool wash cycle on this Hotpoint machine has red into the compartment 1. been tested and approved by The Woolmark Company...
Troubleshooting Your washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on.
Page 14
The machine vibrates a lot during • The feet have not been adjusted, enabling the machine to rock. the spin cycle. • New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine. •...
OR NON-DOMESTIC PREMISES. 10 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 03448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...
Need help?
Do you have a question about the WDUD 9640 and is the answer not in the manual?
Questions and answers