Key Indicator Lights; Standby Switching - Barco Coronis Uniti MDMC-12133 User Manual

4. Daily operation
Maximize quality assurance
The 'MediCal QAWeb' system offers online service for high-grade Quality Assurance, providing maximum
diagnostic confidence and uptime.
Barco recommends to install MediCal QAWeb Agent and apply the default QAWeb policy
at least. This policy includes calibration on regular intervals. Connecting to MediCal
QAWeb Server offers even more possibilities.
Learn more and sign up for the free MediCal QAWeb Essential level at
www.barco.com/healthcare/qa.
4.2

Key indicator lights

About the key indicator lights
By default, the indicator lights of the keys will be dimmed which makes the keys unavailable at that mo-
ment. To make the keys illuminate and available for further actions touch one of the keys. As a result, all
keys will be illuminated and are now available for further actions. However, if no further actions are taken
within the following 5 seconds, the keys will dim again.
The I-Luminate/Left key is always lit and available for activation of the I-Luminate fea-
ture. Please refer to "I-Luminate", page 27 for more information.
The key auto-dim function can be disabled in the OSD menus. Please refer to "Key in-
dicator lights", page 30 for detailed instructions on how to do this.
4.3

Standby switching

The connected power supply also provides a switch that can be used to turn the power
completely off. To use the display, please make sure to switch on this power supply.
This can be done by pushing the on/off switch on the power supply into the "│" position.
To switch your display on using the keys:
Switching on the display while it is in standby mode can be done by:
1. Push the standby key once.
As a result, the display will switch on and the power status indicator light is white.
During start-up phase, the orange indicator light and the white indicator light are lit, until
the unit is fully started.
24 K5902079 CORONIS UNITI 21/04/2015