Alarm Smart Silence; Silence - FireAngel ST-622 User Manual

b The unit will give an audible alarm
consisting of 2 cycles of 3 loud beeps,
then stop automatically .
c The red LED on your alarm will flash
rapidly during the audible signal .
NOTE: The test button accurately tests
the alarm's smoke sensing circuit, there is
no need to test your alarm with smoke . If
your smoke alarm fails to give an audible
test signal, please refer immediately to the
trouble shooting guide at the end of this
manual .
WARNING: You should test your smoke
alarm every week .
ALARM SMART

SILENCE™

DANGER: If your smoke alarm emits the
full alarm signal and you are not testing
the unit, the smoke alarm is warning
you of a potentially dangerous situation
that requires your immediate attention .
Only use the alarm silence function after
making sure that there is no ongoing fire
emergency situation . Do not block the
vents on the alarm or disable the smoke
alarm in any way, as this will remove your
protection . Smoke alarms can sometimes
react to cooking fumes or other non
emergency situations . Your smoke alarm
features "Smart Silence" technology . In
the event of a known false alarm your
smoke alarm can be temporarily silenced
by pressing the central test button . Your
alarm will automatically return to full
sensitivity within 10 minutes .
NOTE: If the level of smoke reaching the
alarm is very high the alarm silence will be
overridden and the alarm will continue to
sound .
a Press and release the silence button, the
alarm sound will shortly stop .
9