Panasonic KX-TDA50 Programming Manual page 176

2.7 [1] Configuration
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
TIE (E & M): TIE Line
OPX: Off Premise Extension
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.17.1 T1 Line Service
Trunk Property (for TIE channel)
Selects the CO line property of the TIE channel.
Default
Private
Value Range
Public: Use the DIL/DID method to distribute incoming CO line calls.
Private: Use the TIE line service between two or more PBXs.
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.10 INCOMING CALL FEATURES
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
1.13.13 PRIVATE NETWORK FEATURES
CPC Signal Detection (DID)—Outgoing, Incoming (for DID channel)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO
line calls before disconnecting the line. When None is selected here, the line will not be disconnected
when a CPC signal is not detected.
Default
160 ms
Value Range
None, 80 × n (n=2–75) ms
176 PC Programming Manual