Facebook - Not Supported; Myspace - Not Supported; Twitter - Not Supported; Text Entry - Samsung Galaxy S III User Manual

3. From any Flipboard screen, swipe right until you reach the far-left screen.
Note: After you have reached the far-left screen, you cannot swipe right any further.
4. If necessary, tap the Search icon at top-right.
5. If necessary, tap the < icon.
6. Tap Accounts
7. Under YOUR ACCOUNTS, tap the desired logged in account.
8. Tap Sign out.
9. Tap Sign out again to confirm.

Facebook - Not supported

This feature is not supported. Facebook is available through Play Store.

MySpace - Not supported

This feature is not supported. MySpace is available through Play Store.

Twitter - Not supported

This feature is not supported. Twitter is available through Play Store.

Text Entry

Text entry modes

To switch between text entry modes, follow these steps:
1. From any Home screen, tap the Menu key.
2. Tap Settings.
3. Tap Language and input.
4. To change the default keyboard, tap Default and then tap either Samsung keyboard or Swype.
5. Tap the Settings icon next to Google voice typing or Swype to change the settings for these input types.
6. Tap the Settings icon next to Samsung keyboard.
7. Adjust the following settings as desired:
o
To turn on or off predictive text mode, tap the Predictive text Slider to enable or disable.
enabled, slider moves right and turns green. When disabled, slider moves left and turns grey.
o
To turn on or off T9 Trace mode, tap T9 Trace to select or clear the check box and enable or disable.
Note: To use T9 Trace mode, predictive text mode must be enabled.
o
Tap Portrait keyboard types.


Entering text using T9 Trace mode

Note: To enable T9 trace made, predictive text mode must be enabled.
To enter text using T9 Trace mode:
1. Drag your finger from the first letter to the second letter of a word and continue dragging to each letter until you reach the
end of the word.
2. Lift your finger from the screen.
3. If prompted, tap the word from the displayed list.

Entering text using Multi-tap mode

Note: To use multi-tap mode, you must have 3x4 keyboard mode enabled as your keyboard type.
To enter text using multi-tap mode:
1. Tap the key containing the desired letter one or more times until the letter appears on the screen.
2. To type the number assigned to the key, touch and hold on the key.
Note: For best results, turn off predictive text mode while using multi-tap mode.
Entering text using Predictive text mode
To enter text using predictive text mode:
Tap one of the following options:

Qwerty

3x4 keyboard
Note: When