JVC MX-GT98V Service Manual page 12

MX-GT98V/MX-GT95V/MX-GT88V
MX-GT85V/MX-G78V/MX-G75V
<Front panel assembly>
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the front panel assembly.
Removing the cassette mechanism
assembly (See Fig.27)
1. Disconnect the card wire from connector CN306 on
the head amplifier & mechanism control board.
2. Remove the seven screws N attaching the cassette
mechanism assembly.
Removing the display system control
board (See Fig.28 to 30)
1. Remove the four screws O attaching the stay
bracket.
2. Disconnect the card wires from connector CN316
and CN880 on the display system control board.
3. Remove the six screws P attaching the display
system control board.
4. If necessary, disconnect the wire from connector
CN911 on the front side of the display system control
board and unsolder FW915.
Removing the CD eject board
1. Remove the three screws Q attaching the CD eject
board.
2. If necessary, unsolder FW915 on the CD eject
board.
Q
CD eject board
FW915
(Solding)
Q
1-12
(See Fig.30 and 31)
Fig.31
Head amplifier
& mechanismcontrol board
CN306
N
Cassette mechanism
assembly
Display system control board
P
P
FW915
(Solding)
P
CN880
CN911
Display system control board
N
N
N
Fig.27
O
Stay bracket
Fig.28
CN316
P
P
Display system control board
Fig.29
CD eject board
FW915
FW915
Fig.30