NEC SigmaBlade N8406-040(F) User Manual page 189

Transmit setting file to 8G FC Switch
2.
Using the "configdownload" command allows a setting file to be transmitted to the 8G FC Switch.
Format of "configdownload" command
configdownload
Protocol (scp or ftp) [ftp]:
Server Name or IP Address [host]:
User Name [user]:
File Name [config.txt]:
Section (all|chassis|switch [all]):
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file's configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause this switch to fail. A switch reboot might be
required for some parameter changes to take effect.
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]:
Password:
NOTE:
The values in angle brackets ([ ]) are defaults.
← Command
← Transmission protocol
← IP address of FTP server
← User name of FTP server
← File name
← Transmitted file type
*** CAUTION ***
← Executing transmission or cancel?
← Password of FTP server
- 189 -