Advertisement
Available languages
Available languages
ReSet to FACtoRY SettINGS
1. With machine being
turned off, press and hold
down the Lungo button for
5 seconds.
3. LEDs will then continue to blink
normally, as heating up, until ready.
Steady lights: machine ready
2. LEDS will blink fast 3 times to
confirm machine has been reset
to factory settings.
3X
Factory settings:
espresso Cup: 40 ml
Lungo Cup: 110 ml
Power off mode: 9 min
en
12 13
Hide quick links:
Advertisement
Chapters
Need help?
Do you have a question about the MAGIMIX M190 and is the answer not in the manual?
Questions and answers
I have tried factory reset many times but machine only delivering 40ml on both lungo and espresso.
Your Nespresso MAGIMIX M190 is likely still using the factory settings, which define the espresso cup size as 40ml and the lungo cup size as 110ml. If both buttons are delivering only 40ml after multiple resets, it may indicate an issue with the machine's memory or a blockage affecting water flow. Try reprogramming the cup sizes manually by holding down the respective button until the desired volume is reached. If the issue persists, descaling the machine may help restore proper water flow.
This answer is automatically generated