Advertisement
Available languages
Available languages
EMPTYING THE SYSTEM BEFORE A PERIOD
OF NON-USE AND FOR FROST PROTECTION,
oR BeFoRe A RePAIR
noTe: your machine will be blocked for 10 minutes after emptying mode�
1. to enter the emptying
mode, press both the espresso
and Lungo button to turn the
machine off.
Both LEDs blink
alternatively.
2. Remove the water tank
and open the lever.
4. Close the lever.
5. Machine switches
off automatically.
3. Press both the espresso
and Lungo button for
3 seconds.
6. empty and clean the
used capsule container
and drip tray.
Hide quick links:
Advertisement
Chapters
Need help?
Do you have a question about the MAGIMIX M190 and is the answer not in the manual?
Questions and answers
I have tried factory reset many times but machine only delivering 40ml on both lungo and espresso.
Your Nespresso MAGIMIX M190 is likely still using the factory settings, which define the espresso cup size as 40ml and the lungo cup size as 110ml. If both buttons are delivering only 40ml after multiple resets, it may indicate an issue with the machine's memory or a blockage affecting water flow. Try reprogramming the cup sizes manually by holding down the respective button until the desired volume is reached. If the issue persists, descaling the machine may help restore proper water flow.
This answer is automatically generated