Bluetooth Section - Kenwood KVT-7012BT Instruction Manual

REFERENCES REFERENCES
HDMI interface section
Connector Type TYPE-A
MHL interface section
Supported Version
MHL 2.1
Maximum Power Supply Current
DC 5 V 900 mA

Bluetooth section

Technology Bluetooth 3.0 + EDR
Frequency 2.402 GHz to 2.480 GHz
Output Power +4 dBm (MAX), 0 dBm (AVE),
Power Class 2
Maximum Communication Range
Line of sight approx. 10 m
(32.8 ft)
Audio Codec SBC/AAC/MP3
Profile HFP (Hands Free Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GAP (Generic Access Profile)
PBAP (Phonebook Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
DSP section
Graphics equalizer
BAND 5 Band
Frequency (Hz) (BAND1-5)
62.5/250/1k/4k/16k
Gain -9/-8/-7/-6/-5/-4/-3/-2/
-1/0/1/2/3/4/5/6/7/8/9 dB
2 Way X'Over
HIGH PASS FILTER frequency
Through/50/60/80/100/120/150/
180/220
SLOPE –6/–12/–18/–24 dB/Oct.
LOW PASS FILTER frequency
50/60/80/100/120/Through
SLOPE –6/–12/–18/–24 dB/Oct.
Position
Front/Rear/Subwoofer Delay
0 ft to 20.0 ft (0.07 ft Step)
Gain –8 dB to 0 dB
Subwoofer Level –50 dB to +10 dB
FM tuner section
Frequency Range (200 kHz)
87.9 MHz to 107.9 MHz
Usable Sensitivity (S/N: 30 dB Dev 22.5 kHz)
9.3 dBf (0.8 V/75 )
Quieting Sensitivity (S/N: 50 dB Dev 22.5 kHz)
15.2 dBf (1.6 V/75 )
Frequency Response (±3.0 dB)
30 Hz to 15 kHz
Signal to Noise Ratio
72 dB (MONO)
Selectivity (±400 kHz)
≥ 80 dB
Stereo Separation 45 dB (1 kHz)
AM tuner section
Frequency Range (10 kHz)
530 kHz to 1 700 kHz
Usable Sensitivity 35 dB
ENGLISH 69