Combination Headlamps And Dipper Switch - Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual

Instruments and controls
l To cancel the unit setting procedure before
completion, press the button (A).
3
l The outside temperature and digital clock are
not shown during the unit selecting procedure.
l If the "SET" button is not pressed for about
15 seconds or longer in the middle of the se-
lection, the currently selected unit is set auto-
matically. The display will return to the orig-
inal display item.
3-18
Combination headlamps and
dipper switch
E00506000776
Headlamps
Rotate the switch to turn on the lamps.
OFF All lamps off
Position, tail, licence plate and instrument
panel lamps on
Headlamps and other lamps go on
NOTE
l Do not leave the headlamps and other lamps
on for a long while the engine is stationary.
A run-down battery could result.
l When it rains or when the vehicle has been
washed, the inside of the lens sometimes be-
comes foggy. This is the same phenomenon
as when window glass mists up on a humid
day, and does not indicate a functional prob-
lem. When the lamp is switched on, the heat
will remove the fog. However, if water gath-
ers inside the lamp, we recommend you to
have it checked.
[Vehicles with Daytime Running Lamp]
When the ignition switch is in the "ON" position
and the lamp switch is set to the "OFF" position,
the low beam of the headlamps, tail lamps, etc.,
will illuminate.
Lamps (headlamps, fog lamp, etc.) au-
to-cutout function
l If the key is turned to the "LOCK" or
"ACC" position or removed from the igni-
tion switch and the lamps will stay on for
about 3 minutes without opening the driver's
door while the lamp switch in the "
tion, automatically turn off.
l If the key is turned to the "LOCK" or
"ACC" position or removed from the igni-
tion switch and the driver's door is opened
within 3 minutes while the lamp switch in
the " " position, a buzzer will sound to
warn the driver that the lamps have not been
turned off, and these lamps will automatical-
ly turn off.
NOTE
l The lamp auto-cutout will not function when
the lamp switch is in the " " position.
" posi-