Digital Clock - Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual

Instruments and controls
3
A- Outside temperature ® p. 3-12
B- Driving information ® p. 3-13
C- Digital clock ® p. 3-10
NOTE
l The display unit (ex. km or mile) and bright-
ness can be changed as desired. (Refer to
"Display brightness adjustment" on page
3-16 and "Display unit selection" on page
3-16.) When the system cannot provide a def-
inite value for momentary fuel consumption/
average fuel consumption/driving range/aver-
age speed, it is displayed as "---".
l The figure of the display varies according to
the conditions under which a vehicle is trav-
elling (road conditions, the manner in which
the vehicle is being driven, etc.).
Observe display for reference because the fig-
ure of the display may differ from the actual
figure.
3-10

Digital clock

E00503700118
Following modes are available for digital clock ad-
justment:
l For vehicles with MITSUBISHI MOTORS
genuine audio automatic mode and manual
mode
l Except for vehicles with MITSUBISHI
MOTORS genuine audio manual mode only
Select the automatic mode or the manual mode by
performing the following operations:
1. Enter the function setup mode by pushing
the "MENU" button.