Turn On & Sync - Braven 650 Owner's Manual

TURN ON & SYNC
1 . Slide the power switch up to the "on"
position. You will hear the BRAVEN
power up sound.
2. Activate Bluetooth® on the phone or
device you are pairing with
(see your
device's instruction manual for information
on activating its Bluetooth® settings).
3. Press and hold the Pairing Button on
the BRAVEN speaker until the Sync
Status Light begins to flash rapidly
and you hear the BRAVEN sync
sound.
BRAVEn
4. Go to your phone or device's
Bluetooth® settings and select the
BRAVEN device from the list.
5. If asked for a passcode enter "0000"
You only need to do this once for each device you are
syncing to your BRAVEN speaker. Your BRAVEN speaker
will remember the last 8 devices it has paired with.
NOTE: If the BRAVEN does not have an active Bluetooth®
connection and is left on, it will shut itself off after 30
minutes. To restart the BRAVEN you will need to slide
the switch to the "off" position and then back to the "on"
position.