GET TO KNOW YOUR BRAVEN VOLUME UP / VOLUME DOWN / SKIP TRACK (press and hold) SKIP BACK (press and hold) POWER SWITCH PAIRING / ANSWER-END CALL / PAUSE-RESUME MUSIC POWER / PAIRING STATUS LIGHT RESET BUTTON EXTERNAL USB BATTERY CHECK BUTTON...
(BRV-1). Press the same button “BRAVEN BRV-1” from the list. again for 2-3 seconds to turn your BRAVEN off. If asked for a passcode enter “0000” Your BRAVEN will remember the last 8 devices it has Activate Bluetooth ® on the phone paired with.
Capacity lights are solid (not flashing), – tablets and other 2A devices cannot be charged indicating a full charge (typically 2 to 3 by your BRV-1) using the full-sized USB port located hours). behind the cap. To use external charging: Turn your BRAVEN on.
IMPORTANT - To ensure your BRAVEN BRV-1 speaker is prepared for use in a wet environment, remove all cable connections and tightly close the rear water cap. If the water cap is not properly closed, the BRV-1...
Page 6
WARNINGS, CAUTIONS & LEGAL INFORMATION Full manual and troubleshooting: braven.com/manuals...
Need help?
Do you have a question about the BRV-1 and is the answer not in the manual?
Questions and answers