Upgrading The Firmware Remotely - Canon VB150 User Manual

Upgrading the Firmware Remotely

When a new version of the firmware is released, the firmware can be upgraded remotely. To
upgrade remotely, use the "vb150rfu.exe" program on the CD-ROM and the new firmware.
1
2
1
3
5
c
Note
107
Obtain the new firmware.
Visit the following Web site (URL:http://www.canon.com/webview) for the latest
information on new firmware.
Launch the "vb150rfu.exe" program on the enclosed CD-ROM and
use the procedure below to perform the remote upgrade.
Enter the IP address, user name and password.
Specify the firmware file to be transferred to the server.
The completion window appears.
Do not turn the VB150 off until the completion window appears. Turning the
VB150 off before the completion window appears may prevent the VB150 from
starting up properly.
● Server Address: Camera server IP address (→ P.36)
● HTTP Port : The HTTP port No. of the camera server (→ P.56)
● Administrator Name: Server administrator user name (→ P.35)
● Administrator Password: Server administrator password (→ P.35)
The current version is displayed.
2
Store the transferred firmware in
4
flash ROM.