Installing And Removing The Card - Canon EOS Rebel XS Instruction Manual

Installing
and Removing the Card
Removing the Card
Access Eamp
Open the cover,
_ Set the power switch to <OFF>.
_ Check that "Recording." is not
displayed on the LCD monitor
_+ Make sure the access lamp is off,
then open the coven
'_9 Remove the card.
_ Gently push in the card, then let go
The card will stick out
Pull the card straight out, then close
the cover.
_]_ _ When the access lamp is let or blEnking, it indicates that the images
_re being written to or fe_d by the c_rd_ being er_sea or data is
being transferred. While t_le access _mp is lit or blinking, never do
any of the following. Doing So may damage the image data. I_ m_y
_Jso d_mage th_ ¢:a_d or" c_ me_'EL
Opening the card slot cover.
Opening the battery eomp_r_men_ c_ver.
o Shaking or b_nging the carner_ around.
® If the card aEready contains recorded im_ges_ _n_ _age number mlgnl
not s_art from 000t. (p.110)
Do not touch the c_rd's contacts with your fingers _r me_al o_ec_s.
If a card-reltaed _rror message is displayed on the LCD monlta remove.
_nd reinstall the c_rd. if the error per_i_ u_e _ dlffereta c_a.
If yOU C_ t_rl_fe_ _l] _h_ images i_
_ne C_ _o E__e_sor_l
COmpLl_£_
transfer all th_ images _nd then fo_mta the card m40 The card m_ I
ther_
i't_tL_r_to
r_o_m_l.
32