Related Manuals for Uni-Mig MINI-MIG 120
Summary of Contents for Uni-Mig MINI-MIG 120
- Page 1 UNI FLAME AUTOLIFT MINI-MIG 120 Manual Standard MIG / MAG 240 Volt 10 AMP PLUG FAN COOLED...
- Page 2 YEARS Warranty Machine Model Description Part Number MINIMIG120 KMM120 CONTENTS PAGE No: Safety Main Parameter. Machine Features Installation & Operation Caution Maintenance Troubleshooting Machine Model UNIMIG pursue a policy of continuous research and development, and therefore reserve the right to change the specifications, or design, without prior notice. 2 year warranty power source.
- Page 3 SAFETY Welding and cutting equipment can be dangerous to both the operator and people in or near the surrounding working area, if the equipment is not correctly operated. Equipment must only be used under the strict and comprehensive observance of all relevant safety regulations. Please read and understand this instruction manual carefully before the installation and use/operation of this equipment.
- Page 15 CAUTION 1. Working Environment. The environment in which this welding equipment is installed must be free of grinding dust, corrosive chemicals, flammable gas or materials etc, and at no more than maximum of 80% humidity. When using the machine outdoors protect the machine from direct sun light, rain water and snow etc;...
-
Page 16: Troubleshooting
MAINTENANCE WARNING: Exposure to extremely dusty, damp, or corrosive air is damaging to the welding machine. In order to prevent any possible failure or fault of this welding equipment, clean the dust at regular intervals with clean and dry compressed air of required pressure.
Need help?
Do you have a question about the MINI-MIG 120 and is the answer not in the manual?
Questions and answers