Table of Contents
Advertisement
8
Installing the Software
8.1
Easy Setting Box
"Easy Setting Box" enables users to use the monitor by partitioning multiple sections.
8.1.1 Installing the Software
1
Insert the installation CD into the CD-ROM drive.
2
Select the "Easy Setting Box" setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "Easy Setting Box" setup file on the CD-ROM.
3
When the Installation Wizard appears, click Next.
4
Follow the instructions given on the screen to proceed with installation.
Restrictions and Problems with the Installation ("Easy Setting Box")
The "Easy Setting Box" installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
System Requirements
OS
Windows XP 32Bit/64Bit
Windows Vista 32Bit/64Bit
Windows 7 32Bit/64Bit
Windows 8 32Bit/64Bit
Hardware
At least 32MB of memory
At least 60MB of free space on the hard disk drive
Easy Setting Box
The software may not work properly if you do not restart the computer after the installation.
The "Easy Setting Box" icon may not appear depending on the computer system and the
product specifications.
If the shortcut icon does not appear, press the F5 key.
8 Installing the Software
83
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the U28E590D and is the answer not in the manual?
Questions and answers
How to add speakers
To add speakers to the Samsung U28E590D monitor, follow these steps:
1. Check Audio Output: The monitor has a headphone/audio out port. Ensure your speakers can connect using a 3.5mm audio jack.
2. Connect Speakers: Plug the speaker cable into the headphone/audio out port on the monitor.
3. Check Video Source: Ensure the video card's ports support audio output if using HDMI.
4. Power Cycle If Needed: If there is static or no sound, turn off the monitor, unplug the speakers, then reconnect them to the monitor.
5. Adjust Settings: Use the monitor menu to check sound settings and ensure the correct output is selected.
This should enable sound output from the connected speakers.
This answer is automatically generated