Table of Contents
Advertisement
1
Preparations
1.3.2 Removing the Stand
Place a soft cloth over the table to protect the product and
place the product onto the cloth so that the front of the product
faces downwards.
To disassemble the stand from the monitor, make sure to press
the lower part of the monitor with one hand, and pull and sway
sideways the stand with the other hand, as shown in the
picture.
Turn the connecting screw at the bottom of the stand base to
separate it.
Remove the stand neck from the stand base by pulling it in the
direction of the arrow as shown in the figure.
26
1 Preparations
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the U28E590D and is the answer not in the manual?
Questions and answers
How to add speakers
To add speakers to the Samsung U28E590D monitor, follow these steps:
1. Check Audio Output: The monitor has a headphone/audio out port. Ensure your speakers can connect using a 3.5mm audio jack.
2. Connect Speakers: Plug the speaker cable into the headphone/audio out port on the monitor.
3. Check Video Source: Ensure the video card's ports support audio output if using HDMI.
4. Power Cycle If Needed: If there is static or no sound, turn off the monitor, unplug the speakers, then reconnect them to the monitor.
5. Adjust Settings: Use the monitor menu to check sound settings and ensure the correct output is selected.
This should enable sound output from the connected speakers.
This answer is automatically generated