Table of Contents
Advertisement
7
Information Menu and Others
7.2
Configuring Eye Saver Mode, Brightness, and Contrast
from the Initial Screen
Adjust the Brightness,
Eye Saver Mode
Not available when
Brightness
This menu is not available when
This menu is not available when
This menu is not available when
Contrast
This option is not available when
This menu is not available when
This menu is not available when
(PBP Mode).
1
When you control the JOG button UP/DOWN, the following screen will appear.
The following screen will appear.
2
Move the JOG button UP/DOWN to select Brightness,
3
Move the JOG button LEFT/RIGHT to adjust the Brightness,
Contrast
and
Eye Saver Mode
PIP/PBP Mode
is set to On.
SAMSUNG
Bright
MAGIC
Eco Saving Plus
Eye Saver Mode
SAMSUNG
Bright
MAGIC
Game Mode
PIP/PBP Mode
Contrast
Eye Saver Mode
Brightness
by moving the JOG button.
is set to
Dynamic Contrast
is enabled.
is enabled.
is in
Cinema
or
Dynamic Contrast
is enabled.
is set to
On
and the
Size
Off
Contrast
or
Eye Saver
Contrast
or
Eye Saver Mode
7 Information Menu and Others
mode.
mode.
is set to
Mode.
setting.
81
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the U28E590D and is the answer not in the manual?
Questions and answers
How to add speakers
To add speakers to the Samsung U28E590D monitor, follow these steps:
1. Check Audio Output: The monitor has a headphone/audio out port. Ensure your speakers can connect using a 3.5mm audio jack.
2. Connect Speakers: Plug the speaker cable into the headphone/audio out port on the monitor.
3. Check Video Source: Ensure the video card's ports support audio output if using HDMI.
4. Power Cycle If Needed: If there is static or no sound, turn off the monitor, unplug the speakers, then reconnect them to the monitor.
5. Adjust Settings: Use the monitor menu to check sound settings and ensure the correct output is selected.
This should enable sound output from the connected speakers.
This answer is automatically generated