Installation; Precautions; Important Device Safety Information - HP R12000 User Manual

Installation

Precautions

See the complete regulatory compliance notices in Safety and Compliance Information for Server, Storage,
Power, Networking, and Rack Products on the HP website
(http://www.hp.com/support/Safety-Compliance-EnterpriseProducts). In addition, follow the safety
precautions that are specific to this device.
Save these instructions. This document contains important safety instructions that should be followed during
installation, operation, and maintenance of the UPS and batteries.
100 kg
220 lb
12 kg
26.5 lb
WARNING:
equipment in the rack might cause the rack to become unstable. Install the heavier components
first, and then continue to populate the rack from the bottom to the top.
WARNING:
installation of options and routine maintenance and service of this product must be performed by
individuals who are knowledgeable about the procedures, precautions, and hazards associated
with AC power products.
WARNING:
is reduced if grounds are removed during installation and maintenance.

Important device safety information

This symbol indicates that the power unit exceeds the recommended weight for one
individual to handle safely. Weight for each power unit is:
• R12000DF—16 kg (35.2 lb)
R18000DF—20.87 kg (46 lb)
•
WARNING: To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
This symbol indicates that the 3U DirectFlow Battery Pack exceeds the recommended
weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
This symbol indicates that the 1U DirectFlow Battery Pack exceeds the recommended
weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
A risk of personal injury or damage to the equipment exists. Uneven loading of
A risk of personal injury from electric shock and hazardous energy levels exists. The
Contact with any part of a grounded battery can result in electrical shock. Shock risk
Installation 18