Sanyo PLC-WXU30 Service Manual page 14

Mechanical Disassembly
v Optical unit, NETWORK board, Buzzer, Temp., Line Filter board,Fans removal
1. Remove the Optical unit.
. Remove the NETWORK board.
3. Remove the Battery and Buzzer board.
3-1. Remove Screw (T3x8) and 4 hooks on the duct and then remove the
Duct.
3-. Remove the Duct top and then remove the Buzzer board.
4. Remove the Line filter board and Temp. board.
5. Remove fans (FAN903,FAN904,FAN905) and SP901.
Projection lens
(M.5x8)x4
(T3x8)x
NETWORK board
Temp. board
Duct top
FN905
Buzzer board
(M3x10)
Battery
(T3x8)x5
(T3x6)
(T3x6)x
(T3x8)
FN904
FN903
-14-
Optical unit
Line filter board
Noise filter
Duct bottom
SP901
Fig.4