Sanyo PLC-WXU30 Service Manual page 13

Mechanical Disassembly
x Main Board, AV Board, Rear Panel and Fans removal
1. Remove the Main board.
. Remove the Rear panel.
3. Remove AV board.
4. Remove fans (FN901, FN90).
(M.5x6)x5
AV board
c Fan (FN907) removal
1. Disconnect the lamp ballast socket and
remove fan (FN907)
Main board
(T3x6)(Black)x
(M.5x6)
(T3x8)
Trigger
(M3x8)
Ballast
socket
Fig.3
-13-
Rear panel
(T3x6)x
FN901
FN90
FN907
Trigger
* Trigger should be mounted as
the figure above.
Side grill
Fig.2
Duct